Mitsubishi MOTORS SHOGUN SPORT, Руководство пользователя

Страница: 247 / 501

Anti-lock brake system (ABS)
6-80 Starting and driving
6
E00607102610
The anti-lock brake system (ABS) helps pre-
vent the wheels from locking up when brak-
ing. This helps maintain vehicle drivability
and steering wheel handling.
 Always keep a safe distance from the
vehicle in front of you. Even if your vehi-
cle is equipped with the ABS, leave a
greater braking distance when:
• Driving on gravel or snow-covered
roads.
• Driving with tyre chains installed.
• Driving on roads where the road surface
is pitted or has other differences in sur-
face height.
• Driving on uneven road surfaces.
 Operation of ABS is not restricted situa-
tions where brakes are applied suddenly.
This system may also prevent the wheels
from locking when you drive over man-
holes, steel roadwork plates, road mark-
ings, or any uneven road surface.
 When the ABS is in use, you may feel the
brake pedal pulsation and the vibrations
of the vehicle body and steering wheel. It
may also feel as if the pedal resists being
pressed.
In this situation, simply hold the brake
pedal down firmly. Do not pump the
brake, which will result in reduced
braking performance.
 An operation noise is emitted from the
engine compartment or feel a shock from
the brake pedal when start driving imme-
diately after starting the engine. These are
normal sound or operation that the ABS
makes when performing a self-check. It
does not indicate a malfunction.
 The ABS can be used after the vehicle has
reached a speed over approximately
6 mph
. It stops working when the vehi-
cle slows below
4 mph
.
E00607202510
Warning lamp
Warning display
If there is a malfunction in the system, the
ABS warning lamp will come on and the
warning display will appear on the informa-
tion screen in the multi information display.
Under normal conditions, the ABS warning
lamp only comes on when the ignition switch
is turned to the “ON” position or the opera-
tion mode is put in ON and goes off a few
seconds later.
Anti-lock brake system
(ABS)
Driving hints
CAUTION
 The ABS cannot prevent accidents. It is your
responsibility to take safety precautions and
to drive carefully.

To prevent failure of the ABS, be sure all
4 wheels and tyres are the same size and the
same type.
 Do not install any aftermarket limited slip
differential (LSD) on your vehicle. The ABS
may stop functioning properly.
ABS warning lamp/display
CAUTION
 Any of the following warning lamp/display
behaviour indicates that the ABS is not func-
tioning and only the standard brake system is
working. (The standard brake system is func-
tioning normally.) If this happens, please
contact your nearest authorised
MITSUBISHI MOTORS dealer for inspec-
tion.
BK0240501EN.book 80 ページ ２０１６年１１月１０日 木曜日 午前１０時３５分