Mindray WATO EX-65, Руководство оператора

Страница: 71 / 276

5-5
„ When screen layout is set to measured values screen, this area displays Paw waveform
and ventilation parameters as shown below.
5.2 Screen Setup
To set the desired screen style,
1. Select the [
Screens
] shortcut key and select [
Screens
].
2. You can toggle between [
Normal Screen
], [
Big Numerics
] and [
Measured Values
].
5.3 Parameter Monitoring
5.3.1 O2 Concentration Monitoring
If your anesthesia machine is configured with an O2 sensor, select [
Maintenance
] → [
User
Maintenance
>>]
→
[
Set O2 Sensor Monitoring >>
]. Then select [
ON
] from the pop-up
menu to monitor the patient’s FiO2. Select [
OFF
] if you do not need to use the O2 sensor
monitoring function which the anesthesia machine has. You can make the following settings
when [
O2 Sensor Monitoring
] is set to [
ON
].
5.3.1.1 Switch on O
2
Sensor or O
2
Module
1. Select the [
User Setup
] shortcut key and select [
O2 Monitoring Source >>
].
2. Select [
O2 Sensor
] or [
O2 Module
] as desired. Select [
OFF
] if you do not need to use
the O2 sensor or O2 module.
3 Select to exit the current menu.