MIMAKI JV300-130 A, Руководство по обслуживанию

Страница: 72 / 244

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.2.5 P.1
1
2
3
4
5
6
7
8
R.1.0
4.2.5 DEFAULT SET
 Function
Returning each parameter to the initial value.
 DEFAULT SET List of Items
 Work Procedures
1. Select [#ADJUST] - [DEFAULT SET].
2. Select the parameter to be initialized, and then fix it by [ENTER].
[

] / [

]: Switch
[ENTER]: Confirms (to Confirmation display)
[END]: Return
3. Initialize by [ENTER].
[ENTER]: Execute
[END]: Return
No Item Operation Remarks
1 SYSTEM PARAMETER Initialize the parameter in question.
2 MAINTE PARAMETER Initialize the parameter in question.
3 SERVO PARAMETER Initialize the parameter in question.
4 FEED PARAMETER Initialize the parameter in question.
5 HEAD PARAMETER Initialize the parameter in question.
6 OPE PARAMETER Initialize the parameter in question.
7 INK PARAMETER 1 Initialize the parameter in question.
8 INK PARAMETER 2 Initialize the parameter in question.
9 DEBUG PARAM Initialize the parameter in question.
10 SCAN PARAMETER Initialize the parameter in question.
11 NOZLE RECOCVERY
PARAM
Initialize the parameter in question.
12 SHIPPING set Initializing parameters of others than the adjustments.
FUNCTION
#ADJUST [ENT]
#ADJUST
DEFAULT SET [ENT]
#DEFAULT SET
SYSTEM param. [ENT]
MAINTE PARAMETER
SERVO PARAMETER
:
#DEFAULT SET
INITIAL. OK? [ENT]
Parameter initialized
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > DEFAULT SET
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.