© 2014 MIMAKI ENGINEERING CO.,LTD.
6.3.9
P.2
6.3.9 AMF Unit (OPTION)
1
2
3
4
5
6
7
8
4.
Reverse the disassembly procedure for reassembly.
If installing as an option:
If installing the AMF unit as an option, you need to replace the roll guide BKT B, which is installed by default, with
the accompanying roll guide BKT.
1. Remove the screws of the roll guide 160 (screw x1 each side,
total x2).
2.
Remove the roll guide BKT B (screw x3 each side, total x6)
.
3.
Attach the roll guide BKT L and R (screw x4 each side, total
x8)
.
4.
Attach screws of the roll guide 160 (screw x1 each side, total
x2)
.
5. For the following steps, perform installation using the reverse
steps of disassembly.
Install that with the connector cable sticking out to
the right side.
Roll guide BKT B
Roll guide 160
Screw x2
Screw x6
Roll guide BKT B
Screw x8
Roll guide 160
Roll guide BKT R
Roll guide
Screw
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > AMF Unit (OPTION)
Model
JV300-130/160
Issued 2014.05.30 Revised
F/W ver
1.00
Remark
1.0
Rev.
