MIMAKI JV300-130 A, Руководство по обслуживанию

Страница: 19 / 244

© 2014 MIMAKI ENGINEERING CO.,LTD. 1.3.6 P.1
1
2
3
4
5
6
7
8
R.1.0
1.3.6 Monitoring of the Amount of Remaining Ink
 Outline
 The amount of remaining cartridge ink is calculated in such a way that the amount of ink consumed for the
following operations is calculated by subtraction of remaining ink.
• Number of ink shots by printing and flushing
• Amount of ink suction by cleaning and filling
 When the amount of remaining ink is updated, it is written into the ink IC chip.
 A cartridge error is issued according to the amount of remaining ink.
 Calculation of the amount of consumed ink
 Ink discharging during printing and flushing
• The amount of ink consumed by ink discharging is calculated by counting the number of ink shots.
• This machine counts ink shots for each row of nozzles and performs calculation by taking account of dot sizes
(small, middle and large).
 Ink suction during cleaning and filling
The table below shows the amount of ink consumed for various ink suction operations. (For the 4-color SS21 ink
set)
 Updating of the amount of remaining ink
The amount of remaining ink will be updated and written onto the ink IC chip at the timing shown below.
Motion Ink consumption through one supply path [ml]
SOFT cleaning 0.72
NORMAL cleaning 3.20
HARD cleaning 6.28
Maintenance Filling up 17.8 / 28.0 / 38.0
Initial Filling (No
replacement) Main suction 60
Cobble filling 35
No. Timing for updating Execution conditions
1 At pre-capping operation  Ink has been used for printing or flushing.
 At capping chiefly after completion of printing.
2 At completion of cleaning and filling operation  Ink has been used for cleaning and filling.
 The amount of ink remaining in the cartridge used for the
suction will be updated.
3 When any of the following events has occurred during
printing, cleaning or filling:
 Cover OPEN
 Lever UP
 Media end
 Updated by the amount of ink consumed before the
occurrence of any of the events shown at left.
4 When any of the following errors has occurred during
printing:
 Cartridge near end
 Cartridge ink end
 Cartridge error
 Updated just after occurrence of the error, not waiting for
writing at the capping pre-operation.
 Updated before replacing the cartridge during printing.
MAINTENANCE MANUAL > Operating Principle > Ink System > Monitoring of the Amount of Remaining Ink
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.10 Remark
1.0
Rev.