© 2014 MIMAKI ENGINEERING CO.,LTD.
Maintenance Manual Contents R.1.0
P.1
MAINTENANCE MANUAL > Maintenance Manual Contents
Model
JV300-130/160
Issued 2014.05.30 Revised
F/W ver.
1.00
Remark
Maintenance Manual Contents
1.0
Rev.
1 Operating Principle
1.1 Basic Operation
1.2
Maintenance Function
1.3
Ink System
1.3.1 Configuration
1.3.2 Ink System Error Monitoring
1.3.3 Supply Cartridge Control and
Selection
1.3.4 Cartridge LED Control
1.3.5 Supply Valve Control
1.3.6 Monitoring of the Amount of
Remaining Ink
1.3.7 Use-up Cleaning
1.3.8 Ink Suction and Discharge Control
1.3.9 Initial Filling
2 Electrical Parts
2.1
Block Diagram
2.1.1 Connection Diagram Inside the Main
Body
2.2
Operation Explanation
2.2.1 Operation Explanation
2.3
Circuit Board Specifications
2.3.1 EPL2 Main PCB Assy
2.3.2 SL2H PCB Assy.
2.3.3 COM32 IO PCB Assy.
2.3.4 AC PCB Assy
2.3.5 Color LCD PCB Assy.
2.3.6 RGB LED PCB Assy
2.3.7 Encoder PCB Assy
2.3.8 Mini Memory PCB Assy
2.3.9 Mark Sensor PCB
2.3.10 CART IO PCB Assy.
3 Workflow
3.1 Ink Related Parts
3.1.1 Replacement of the Head Unit
3.1.2 Replacement of the Cartridge Assy
3.1.3 Replacement of the Wiper Unit
3.1.4 Replacement of the Wiper Cleaner
Assy.
3.1.5 Replacement of the Cutter Assy
3.1.6 Replacement of the Selective path
Assy.
3.1.7 Replacement of the Cap Head Assy.
3.2 Driving Parts
3.2.1 Replacement of the X-axis Motor
3.2.2 Replacement of the Y-axis Motor
3.2.3 Replacement of the Y Drive Belt
3.2.4 Replacement of the Linear Encoder
Scale
3.3 Electrical Parts
3.3.1 Replacement of the EPL2 Main PCB
Assy
4 Adjustment Items
4.1 Operation Matrix
4.2 Adjustment Function
4.2.1 AVERAGING 34 ADJUST
4.2.2 STAGGER ADJUST
4.2.3 DROP.POS
4.2.4 REPLACE COUNT
4.2.5 DEFAULT SET
4.2.6 CAPPING
4.2.7 ADJUST WIPER
4.2.8 HEAD WASH
4.2.9 MAINT. WASH
4.2.10 HEAD ID
4.2.11 SERIAL No.
4.2.12 DEALER No.
4.2.13 FEED COMP.2
4.2.14 EDGE ADJUST
4.2.15 POINTER OFFSET
4.2.16 TIME SET
4.2.17 ANGLE ADJUST
4.2.18 LAN CONFIG
4.3 Mechanical Adjustment
4.3.1 Adjustment of the Carriage Slant
4.3.2 Adjustment of the Mounting Location
for the Cutter
4.3.3 Adjustment of the Station Height
4.3.4 Adjustment of the Wiper Height
4.3.5 Adjustment of the JAM Sensor Height
4.3.6 Positioning of the Encoder Sensor
4.3.7 Centering of the Roll Holder
4.3.8 Positioning of the Wiper Drive Link
4.3.9 Parallelism adjustment of the Tension
Bar
5 Test Items
5.1 Test Function
5.1.1 CHECK PATTERN
5.1.2 SENSOR
5.1.3 MEMORY CHECK
5.1.4 KEYBOARD TEST
5.1.5 LCD
