manualshive.com logo in svg

Microsemi SmartTime, Руководство пользователя

"Microsemi SmartTime" - революционное устройство для точного управления временем. Загрузите бесплатное руководство по эксплуатации с нашего веб-сайта для получения инструкций по использованию. Наслаждайтесь новым уровнем уверенности в своем управлении временем благодаря "Microsemi SmartTime". (Download user manual from manualshive.com).

Поделиться
Скачать
background image

 SmartTime Static Timing Analyzer User Guide 

 

 

 

 

 

3 

 

 

Microsemi makes no warranty, representation, or guarantee regarding the information contained 
herein or the suitability of its products and services for any particular purpose, nor does Microsemi 
assume any liability whatsoever arising out of the application or use of any product or circuit. The 
products sold hereunder and any other products sold by Microsemi have been subject to limited 
testing and should not be used in conjunction with mission-critical equipment or applications. Any 
performance specifications are believed to be reliable but are not verified, and Buyer must 
conduct and complete all performance and other testing of the products, alone and together with, 
or installed in, any end-products. Buyer shall not rely on any data and performance specifications 
or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine 
suitability of any products and to test and verify the same. The information provided by Microsemi 
hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such 
information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party 
any patent rights, licenses, or any other IP rights, whether with regard to such information itself or 
anything described by such information. Information provided in this document is proprietary to 
Microsemi, and Microsemi reserves the right to make any changes to the information in this 
document or to any products and services at any time without notice. 

 

About Microsemi 

Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and 
system solutions for aerospace & defense, communications, data center and industrial markets. 
Products include high-performance and radiation-hardened analog mixed-signal integrated 
circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization 
devices and precise time solutions, setting the world's standard for time; voice processing 
devices; RF solutions; discrete components; enterprise storage and communication solutions; 
security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet 
ICs and midspans; as well as custom design capabilities and services. Microsemi is 
headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn 
more at 

www.microsemi.com. 

5-02-00560-6/01.17 

 

Microsemi Corporate Headquarters 

One Enterprise, Aliso Viejo,  

CA 92656 USA

 

Within the USA: +1 (800) 713-4113  

Outside the USA: +1 (949) 380-6100 

Fax: +1 (949) 215-4996  

Email: 

[email protected] 

www.microsemi.com 

 

©2017 Microsemi Corporation. All 
rights reserved. Microsemi and 
the Microsemi logo are registered 
trademarks of Microsemi 
Corporation. All other trademarks 
and service marks are the 
property of their respective 
owners. 

Содержание SmartTime










































































































































Отзывы:

Нет отзывов

Похожие инструкции для SmartTime

Eagle Eye Power Solutions Vigilant ELM Series Troubleshooting Manual preview
Vigilant ELM Series
Бренд: Eagle Eye Power Solutions Страницы: 9
Oakton 150 Series Operating Instructions preview
150 Series
Бренд: Oakton Страницы: 4
Olympus IV0620C Operation Manual preview
IV0620C
Бренд: Olympus Страницы: 12
Fluke Biomedical ESA614 Getting Started Manual preview
ESA614
Бренд: Fluke Biomedical Страницы: 28
VOLTCRAFT 1461483 Operating Instructions Manual preview
1461483
Бренд: VOLTCRAFT Страницы: 108
Wetekom 79 71 59 Instruction Manual preview
79 71 59
Бренд: Wetekom Страницы: 22
Nidec-Shimpo FGE-0.5XY Operation Manual preview
FGE-0.5XY
Бренд: Nidec-Shimpo Страницы: 6
Keller LEO2-Ei Manual preview
LEO2-Ei
Бренд: Keller Страницы: 8
Hanna Instruments HI9146-04 Instruction Manual preview
HI9146-04
Бренд: Hanna Instruments Страницы: 28
Omega DPG3500 Series User Manual preview
DPG3500 Series
Бренд: Omega Страницы: 4
Endress+Hauser 11362Z Safety Instructions preview
11362Z
Бренд: Endress+Hauser Страницы: 24
Isspro R5441 Manual preview
R5441
Бренд: Isspro Страницы: 2
LaserLine LaserRange-Master i5 Manual preview
LaserRange-Master i5
Бренд: LaserLine Страницы: 68
Ocean Optics CHEM2000-UV-VIS Operating Manual And User Manual preview
CHEM2000-UV-VIS
Бренд: Ocean Optics Страницы: 42
Oakton 35631-00 Operating Instructions Manual preview
35631-00
Бренд: Oakton Страницы: 26
Falcon F-Test Owner'S Manual preview
F-Test
Бренд: Falcon Страницы: 25
Winland EnviroAlert EA200 Quick Start Manual preview
EnviroAlert EA200
Бренд: Winland Страницы: 3
Magnusson V10523 Manual preview
V10523
Бренд: Magnusson Страницы: 96

Бренды по названию

Популярные бренды

Загрузить еще бренды