MerCruiser 496 MAG Bravo Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 146

background image

Section 1 - Warranty

90-864839061 NOVEMBER 2006

Page 13

What Mercury Will Do

Mercury Marine's sole and exclusive obligation under this warranty is limited to, at our

expense and at our option, repairing or replacing defective parts with new or Mercury

Marine certified re‑manufactured parts, or refunding the purchase price of the Mercury

product. Mercury reserves the right to improve or modify products from time to time without

assuming an obligation to modify products previously manufactured.

What Is Not Covered

This limited warranty does not cover routine maintenance items, tune ups, adjustments,

normal wear and tear, damage caused by abuse, abnormal use, use of a propeller or gear

ratio that does not allow the engine to run in its recommended wide‑open‑throttle RPM

range (see Specifications), operation of the product in a manner inconsistent with the

recommended operation procedures, neglect, accident, submersion, improper installation

(proper installation specifications and techniques are set forth in the installation instructions

for the product), improper service, use of an accessory or part not manufactured or sold

by us, jet pump impellers and liners, operation with fuels, oils or lubricants which are not

suitable for use with the product (see Specifications), alteration or removal of parts, or water

entering the engine through the fuel intake, air intake or exhaust system. Use of the product

for racing or other competitive activity, or operating with a racing type lower unit, at any

point, even by a prior owner of the product, voids the warranty.
Expenses related to haul‑out, launch, towing, storage, telephone, rental, inconvenience,

slip fees, insurance coverage, loan payments, loss of time, loss of income, or any other

type of incidental or consequential damages are not covered by this warranty. Also,

expenses associated with the removal and/or replacement of boat partitions or material

caused by boat design for access to the product are not covered by this warranty.
Non‑warranty maintenance, replacement, or repair of emission control devices and

systems may be performed by any marine engine repair establishment or individual. The

use of non‑Mercury parts for non‑warranty maintenance or repairs will not be grounds for

disallowing other warranty work. The use of add‑on (as defined at section 1900 (b)(1) and

(b)(10) of Title 13 of the California Code of Regulations) or modified parts not exempted

by the California Air Resources Board may be grounds for disallowing a warranty claim, at

the discretion of Mercury Marine. Failures of warranted parts caused by the use of a

non‑exempted add‑on or modified part will not be covered.

Components Of The Emission Control System

1. Fuel Metering System

a.

Carburetor and internal parts (and/or pressure regulator or fuel injection system)

b.

Intake valves

2. Air Induction System

a.

Intake manifold

3. Ignition System

a.

Spark plugs

b.

Electronic ignition

c.

Ignition coil and/or control module

d.

Ignition wires

4. Positive Crankcase Ventilation (PCV) System

a.

PCV Valve

b.

Oil filler cap

5. Exhaust System.

«
...
19
20
21
22
23
...
»

Содержание 496 MAG Bravo



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для 496 MAG Bravo

Бренд: Jabiru Страницы: 116

Бренд: phytron Страницы: 29

Neomat A Series

Бренд: Nice Страницы: 52

Бренд: TEKCELEO Страницы: 6

Бренд: Parker Страницы: 32

Бренд: B&S Страницы: 26

Бренд: Man Страницы: 92

Бренд: YARDMAX Страницы: 20

Air-injection 50 cc

Бренд: APRILIA Страницы: 33

Low Voltage Motors EQPIII-841

Бренд: Toshiba Страницы: 2

Low Voltage Motors VR Series

Бренд: Toshiba Страницы: 2

Бренд: Toshiba Страницы: 18

Бренд: Toshiba Страницы: 31

Бренд: Toshiba Страницы: 49

Бренд: Oriental motor Страницы: 8

Бренд: Oriental motor Страницы: 12

Бренд: BMW Страницы: 41

Бренд: Volvo Penta Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды