Before using the lashing eyelets, always make
sure they are properly fitted and cannot be
moved.
Observe the notes on the loading the vehicle
(
Y
page 72).
Also observe the following notes:
R
when a load is fastened to the lashing eyelets,
the angle between the load and the lashing
eyelets must not exceed 45°.
R
when a load is fastened to the lashing eyelets,
the tensile load of 150 daN may not be excee-
ded.
Information on suitable load securing aids, lash-
ing materials and suitable accessories can be
obtained from a qualified specialist workshop.
Fitting lashing eyelets
X
Turn the bolt connection
:
anti-clockwise
and unscrew it completely.
X
Insert the lashing eyelet into the guide rail
rotated by 90°.
X
Turn the lashing eyelet 90° clockwise.
X
Slide the lashing eyelet near the load.
The nubs on the underside of the lashing eye-
let must be fully seated in the notches of the
guide rail.
X
Turn the bolt connection
:
clockwise and
tighten it.
Moving the lashing eyelets
X
Turn the bolt connection
:
anti-clockwise
and unscrew it completely.
X
Slide the lashing eyelet near the load.
The nubs on the underside of the lashing eye-
let must be fully seated in the notches of the
guide rail.
X
Turn the bolt connection
:
clockwise and
tighten it.
Removing lashing eyelets
X
Turn the bolt connection
:
anti-clockwise
and unscrew it completely.
X
Turn the lashing eyelet 90° anti-clockwise.
X
Take the lashing eyelet out of the guide rail.
Ashtray and cigarette lighter
Using the ashtray
X
To insert the ashtray: remove the rubber
mat from the stowage space.
X
Press the ashtray
;
into the flat recess in the
centre console with slight pressure until it sits
firmly.
X
To open the ashtray: push the lid
:
of the
ashtray upwards.
X
To remove the ashtray: push the ashtray
;
forwards slightly and lift it up and out.
76
Ashtray and cigarette lighter
Seats
and
stow
age
