Information on technical data
The technical data was determined in accord-
ance with EU Directives. The given data only
applies to vehicles with standard equipment.
You can obtain further information from a
Mercedes-Benz Service Centre.
Only for certain countries: you can find vehi-
cle-specific vehicle data in the COC documents
(CERTIFICATE OF CONFORMITY). These docu-
ments are supplied when the vehicle is deliv-
ered.
Vehicle identification plate, VIN and
engine number
The vehicle identification plate is located in the
area of the A-pillar on the right side of the vehi-
cle.
The data shown in the illustration is sample
data.
:
Vehicle manufacturer
;
EU general operating permit number (for
certain countries only)
=
Maximum permissible gross weight (kg)
?
Maximum permissible front axle load (kg)
A
Barcode
B
VIN (vehicle identification number)
C
Vehicle manufacturer
D
Permissible rear axle load (kg)
E
Maximum gross weight of vehicle combina-
tion (kg) (for certain countries only)
The VIN can be found on the vehicle identifica-
tion plate. Additionally, the VIN is attached in
the windscreen area
:
and stamped in the
frame below the door on the right side of the
vehicle
;
.
The engine number is stamped on the crank-
case.
You can obtain further information from any
qualified specialist workshop.
Vehicle electronics
Notes on work on the engine electron-
ics
!
Have the engine electronics and parts
belonging to it such as control units, sensors,
actuating components or electric cables
maintained only at a qualified specialist work-
shop. Otherwise, vehicle components may
wear more quickly and the vehicle's operating
permit may be invalidated.
Vehicle electronics
221
Tech
nical
da
ta
