Under ‘ADVANCED MODE’ there are two additional programs:
Calibration - Option.
DC Protection Relay - Option.
During the start-up process, the text in red above can appear briefly until ‘TwinCAT’ has finished starting.
CAUTION : If this text is displayed continuously, and the main BALTO program is not started, there may be
a system failure. Please contact your supplier if this occurs.
The start-up dialog should appear, and the ‘System ready’ indicator will illuminate.
After this procedure has been completed, the High-speed DC Circuit Breaker can be switched on.
CAUTION : If the start dialog is not reached, or if the start dialog fails to start the main program -
signalling the ‘System ready’ indicator - the system will shut down after 2 minutes.
Please wait 20 seconds before attempting to start the system again. If start-up problems are not resolved, please
contact customer support.
www.megger.com
41
Operation
