This example contains a negative ‘I’ value which reduces the output. Negative ‘I’ values are valid for both linear and
exponential steps. Configured injections can be saved as a new pre-configured test by pressing the ‘Save As’ button.
Once a test is named, the ‘Save’ button can be used to save any changes to the pre-configured test.
Pre-configured tests are saved on the file system and remain present even after a shutdown and reboot of the BALTO
System.
Test result.
Test results are displayed in the following dialog:
This dialog displays whether the test resulted in a trip.
If so, it displays at what time and current level the trip occurred
The graph key displays the results of the performed measurements.
www.megger.com
+ 7.500 A
119
Secondary Injection.
