9.7 Information BALTO range.
The system’s active configuration displayed in button
2
in the Main Menu is based on the number of connected DC
Current Generators detected by the system.
To return to the Main Menu, press the [<--Back] button.
9.8 Safety Mode.
ATTENTION :
This mode must be activated when the connections must be adjusted or altered while
testing a device.
Select the option from the Main Menu:
Press the button
1
in the Main Menu.
The following dialog will be displayed:
This mode prevents any Current Injections from being made. After the necessary changes are completed, return to
the Main Menu by pressing anywhere on the warning symbol.
CAUTION : It is recommended to utilize this function whenever the system must be left unattended for a
short period of time or during breaks between Current Injections.
9.9 Emergency Stop
The following symbol is displayed in the ‘Info’ dialog when the Emergency Stop Button is pressed down.
www.megger.com
48
Operation