IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 33
4 Getting Started
4.1 Overview
With its easy-to-use keypad and X-Press Programming™ feature, the IMPULSE
®
•G+ Mini makes it easy to get up
and running right away. This chapter explains how to navigate through the VFD’s menus along with the function
and meaning of each button and indicator. The keypad makes it possible to view fault codes and change parameter
settings. The keypad enables you to:
•
Program the various VFD parameters.
•
Monitor the functions of the VFD.
•
Read fault-diagnostic indications.
•
Operate the VFD using the keypad (local operation).
4.1.1 Checks Before Powering
After mounting and interconnections are completed, verify:
•
Correct connections.
•
Correct input power supply (no voltage drop or imbalance, source kVA
≤
500, unless a line reactor is used). If
unsure of the source transformer, use a line reactor.
•
No short circuit conditions.
•
No loose screw terminals (check especially for loose wire clippings).
•
Proper load conditions.
WARNING
Because of the potential hazards that are introduced when any VFD is operated locally, Magnetek advises the
user to avoid operating it this way. If you do operate the VFD locally, be aware that the crane or hoist will move
when you press the RUN button. If you have questions, contact Magnetek.
WARNING
DO NOT power 230V-rated VFDs with 460V power.
Содержание IMPULSE G+ Mini
