IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 93
F07.15
Baud Rate
Sets the communication speed.
10,100-102
10
10 10 Mbps
100 100 Mbps
101 10/100 Mbps
102 100/10 Mbps
F07.16
Comm Loss Timeout
Sets the time-out value for communication loss
detection.
0.0-30.0
0.0
F07.17
Ethernet Speed Scale
Sets the scaling factor for the Ethernet/IP speed
setting/monitor.
-15-15
0.0
F07.18
Ethernet Current Scale
Sets the scaling factor for the Ethernet/IP output
current setting/monitor.
-15-15
0.0
F07.19
Ethernet Torque Scale
Sets the scaling factor for the Ethernet/IP torque
setting/monitor.
-15-15
0.0
F07.20
Ethernet Power Scale
Sets the scaling factor for the Ethernet/IP power
setting/monitor.
-15-15
0.0
F07.21
Ethernet Voltage Scale
Sets the scaling factor for the Ethernet/IP voltage
setting/monitor.
-15-15
0.0
F07.22
Ethernet Time Scale
Sets the scaling factor for the Ethernet/IP time setting/
monitor.
-15-15
0.0
F07.23 to
F07.32
DOA116 (1 to 10)
Dynamic parameters that contain the Modbus
addresses used for programmable registers in the
output assembly 116. Data residing in bites 20 to 39 of
assembly 116 will be written to the respective Modbus
registers identified by the addresses contained in these
parameters. No data is written to the Modbus registers
if the parameter setting is 0.
00-FF
00
F07.33 to
F07.42
DOA166 (1 to 10)
Dynamic parameters that contain the Modbus
addresses used for programmable registers in the
input assembly 166. Data residing in bites 20 to 39 of
assembly 166 will be written to the respective Modbus
registers identified by the addresses contained in these
parameters. No data is written to the Modbus registers
if the parameter setting is 0.
00-FF
00
Parameter
Name
Function
Range
Default
Содержание IMPULSE G+ Mini
