IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 42
4.2.6 Initialization Set-up
4.2.6.1
Parameter Access Level (A01.01)
This parameter controls the level of access for the parameters in the VFD. There are three access levels available
- BASIC, ADVANCED and USER. When the access level is set to ADVANCED (A01.01 = 02), it will allow access to
all parameters outlined in this manual. The BASIC (A01.01 = 01) access level allows access to commonly used
parameters.
Changing the access level to USER (A01.01 = 00) limits access to only parameters stored in the A02.xx table (up
to 32). To set up the A02.xx group,
see Section 4.2.7.4 on page 47
.
4.2.6.2
Control Method (A01.02)
Select the control method best suited for your application.
NOTE:
An auto-tune must be performed for all open loop vector applications.
.
4.2.6.3
Motion (A01.03)
Set this parameter to match the motion of application.
(X-Press Programming) for details.
Setting
Description
00
User Level - Allows access to only the parameters programmed to A02.01 through A02.32.
01
Basic Level - Allows access to a limited amount of commonly used parameters.
02
Advanced Level - Full access to parameters.
Setting
Description
00
V/f Control—For general purpose and multiple motor applications.
02
OLV—Open Loop Vector; for applications requiring precise speed control, quick response and higher
torque at low speeds (150% torque below 1 Hz).
Setting
Description
00
Traverse - Decelerate to stop upon removal of RUN command.
01
Standard Hoist - Immediate stop upon removal of RUN command
04
Braketronic
Содержание IMPULSE G+ Mini
