Magnetek IMPULSE G+ Mini, Техническое руководство

Страница: 35 / 182

IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 35
4.2.2 Keypad LED and Button Functions
Some of the keypad buttons, whose functions are described below, are dual-purpose. The dual-purpose keys have
one function when used in a view-only mode, and another function when used in a programming mode.
4.2.2.1 Keys and Displays on the LED Keypad
No. Display Name Function
1 Data Display Area Displays the frequency reference, parameter number, etc.
2 ESC Key Returns to the previous menu (before ENTER Key is pressed), or
cursor position.
3 RESET Key Moves the cursor to the right.
Resets the VFD to clear a fault situation.
4 RUN Key Pressing the key initiates the RUN command when LOCAL mode
operation is selected.
Starts the auto-tuning process.
5 Up Arrow Key Scrolls up to select the next parameter group or parameter settings. It
also increases the value of the blinking digit of a parameter setting.
6 Down Arrow Key Scrolls down to select the next parameter group or parameter
settings. It also decreases the value of the blinking digit of a
parameter setting.
7 STOP Key Stops the VFD by initiating a base block STOP command.
8 ENTER Key Selects modes or parameters. Displays each parameter’s set value.
By pressing this key again, the set value is stored.
9 LO/RE Selection Key Pressing the key once displays support phone number 866-624-
7378.
Pressing the key again shows control method, motion, and reference
speed.
Pressing the key again will show RESET. Pressing the ENTER Key
afterwards will reset the maintenance timers.