manualshive.com logo in svg

Machtric S900 E Series, Руководство пользователя, Страница: 8 / 136

Поделиться
Скачать
Machtric S900 E Series Скачать руководство пользователя страница 8

·

2

·

Operation Instruction of S900 E Series Inverter

·

3

·

recommended. 

• Ensure that installation position and material can withstand the 

weight of the inverter. Install according to the information in the 
instruction manual. 

• Do not install or operate the inverter if it is damaged or has parts 

missing.

• When carring the inverter, do not hold it by the front cover or 

setting dial. It may fall or fail.

• Do not stand or rest heavy objects on the product.
• Check the inverter mounting orientation is correct.
• Prevent other conductive bodies such as screws and metal 

fragments or other flammable substance such as oil from entering 

the inverter.

• As the inverter is a precision instrument, do not drop or subject it 

to impact.

• Use the inverter under the following enviromental conditions. 

Otherwise, the inverter may be damaged.

Ambient temperature: 

－

10

℃

~40

℃

 

<

non-freezing

>

.

Ambient humidity:  95% RH or less 

<

non-condensing

>

Ambient environment: indoors 

<

free from corrosive gas,flammable 

gas,oil mist,dust and dirt, free from direct sunlight

>

Vibration: max. 0.5G

• Please make sure that the screws are fixed, fastened firmly in 

accordance with the stipulations of the instruction manual, to 
prevent the inverter falling.

• If two or more inverters are installed in a control cabinet, please 

install them according to the information in the instruction manual, 
and it is required to keep enough space and install extra cooling 

fans to keep the air in the cabinet flowing freely to keep the 

temperature inside the cabinet lower than 40

℃

. Overheating may 

cause inverter fault, fire or other accidents. 

• Due to the inverter of akind of electrical and electronic product 

Содержание S900 E Series









































































































































Отзывы:

Нет отзывов