214685
70
Revision A
Figure 5.20: Combine Float Module Left Side
3.
Place spring arm (C) into hook on lever (B) to preload it,
and tighten nut (A) with washer onto the float module.
Figure 5.21: Feeder House Locks
4.
On the combine, ensure lock handle (A) is positioned so
the hooks (B) can engage the float module.
Figure 5.22: Combine and Float Module
CAUTION
Never start or move the machine until you are sure all
bystanders have cleared the area.
5.
Start the engine and slowly drive the combine up to the
header until feeder house saddle (A) is directly under
the float module top cross member (B).
6.
Raise the feeder house slightly to lift the header,
ensuring the feeder saddle is properly engaged in the
float module frame.
7.
Stop the engine and remove the key from the ignition.
Содержание FlexDraper FD1 Series
