Lexmark XM7100 Series, Руководство пользователя

Страница: 78 / 388

4
Prepare the paper or specialty media for loading.
•
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
•
Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on
a level surface.
5
Load the paper or specialty media.
Note: Slide the stack gently into the multipurpose feeder until it comes to a stop.
•
Load only one size and type of paper or specialty media at a time.
•
Make sure the paper fits loosely in the multipurpose feeder, lies flat and is not bent or wrinkled.
•
There are different ways of loading letterhead depending on whether an optional staple finisher is
installed or not.
Without an optional staple finisher With an optional staple finisher
One
‑
sided printing One
‑
sided printing
Loading paper and specialty media 78