Lexmark XM7100 Series, Руководство пользователя

Страница: 176 / 388

Use To
Honor DSR
On
Off
Determine whether the printer uses the DSR Signal.
Notes:
•
Off is the factory default setting.
•
DSR is a handshaking signal used by most serial cables. The serial port
uses DSR to distinguish data sent by the computer from data created by
electrical noise in the serial cable. The electrical noise can cause stray
characters to print. Set this to On to prevent stray characters from
printing.
SMTP Setup menu
Use To
Primary SMTP Gateway Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Specify the amount of time in seconds before the server stops trying
to send an e
‑
mail.
Note: 30 seconds is the factory default setting.
Reply Address Specify a reply address of up to 128 characters in the e-mail sent by
the printer.
Use SSL
Disabled
Negotiate
Required
Set the printer to use SSL for increased security when connecting to
the SMTP server.
Notes:
•
Disabled is the factory default setting.
•
When the Negotiate setting is used, the SMTP server
determines if SSL will be used.
SMTP Server Authentication
No authentication required
Login/Plain
CRAM
‑
MD5
Digest
‑
MD5
NTLM
Kerberos 5
Specify the type of user authentication required for scan
‑
to e
‑
mail
privileges.
Note: “No authentication required” is the factory default setting.
Understanding the printer menus 176