Lexmark XM7100 Series, Руководство пользователя

Страница: 238 / 388

•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Quiet Mode > select a setting
Use To
On Reduce printer noise.
Notes:
•
Print jobs are processed at a reduced speed.
•
Printer engine motors do not start until a
document is ready to print. There will be a short
delay before the first page is printed.
Off Use factory default settings.
Note: This setting supports the performance
specifications of the printer.
3
Click Submit .
Adjusting Sleep mode
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts > Sleep Mode
2
In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.
3
Apply the changes.
Using Hibernate mode
Hibernate is an ultra
‑
low
‑
power operating mode.
Notes:
•
Three days is the default amount of time before the printer enters Hibernate mode.
•
Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long
press of the Sleep button wakes the printer from Hibernate mode.
•
If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
1
From the home screen, navigate to:
> Settings > General Settings
2
From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Hibernate , and then touch
Submit .
Saving money and the environment 238