Erasing non
‑
volatile memory
Erase individual settings, device and network settings, security settings, and embedded solutions by following
these steps:
1
Turn off the printer.
2
Hold down
2
and
6
while turning the printer on. Release the buttons only when the screen with the progress
bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is
fully turned on, a list of functions appears on the printer display, instead of the standard home screen icons.
3
Touch
Wipe All Settings
.
The printer restarts several times during this process.
Note:
Wipe All Settings securely removes device settings, solutions, jobs, and passwords from the printer
memory.
4
Touch
Back
>
Exit Config Menu
.
The printer will perform a power
‑
on reset, and then return to normal operating mode.
Erasing printer hard disk memory
Notes:
•
Some printer models may not have a printer hard disk installed.
•
Configuring Erase Temporary Data Files in the printer menus lets you remove residual confidential
material left by print jobs by securely overwriting files that have been marked for deletion.
Using the printer control panel
1
Turn off the printer.
2
Hold down
2
and
6
while turning the printer on. Release the buttons only when the screen with the progress
bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears. When the printer is
fully turned on, the touch screen displays a list of functions.
3
Touch
Wipe Disk
, and then touch one of the following:
•
Wipe disk (fast)
—This lets you overwrite the disk with all zeroes in a single pass.
•
Wipe disk (secure)
—This lets you overwrite the disk with random bit patterns several times, followed by
a verification pass. A secure overwrite is compliant with the DoD 5220.22
‑
M standard for securely
erasing data from a hard disk. Highly confidential information should be wiped using this method.
4
Touch
Yes
to proceed with disk wiping.
Notes:
•
A status bar will indicate the progress of the disk wiping task.
•
Disk wiping can take from several minutes to more than an hour, during which the printer will be
unavailable for other user tasks.
5
Touch
Back
>
Exit Config Menu
.
Securing the printer
242
Содержание XM7100 Series
