Lexmark XM7100 Series, Руководство пользователя

Страница: 250 / 388

Ordering supplies
To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark
authorized supplies dealers in your area. In other countries or regions, go to
www.lexmark.com or contact the
place where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter
‑
or A4
‑
size plain paper.
Using genuine Lexmark parts and supplies
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party
supplies or parts may affect the performance, reliability, or life of the printer and its imaging components. Use
of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies
or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and
parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage
beyond the intended life may damage your Lexmark printer or its associated components.
Estimated number of remaining pages
The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy
may vary significantly and is dependent on many factors, such as actual document content, print quality settings,
and other printer settings.
The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption
is different from the historical printing consumption. Consider the variable level of accuracy before purchasing
or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, the
estimated cartridge yield is based on approximately 5% coverage per page.
Ordering a toner cartridge
Notes:
•
The estimated cartridge yield is based on approximately 5 percent coverage per page.
•
Extremely low print coverage for extended periods of time may negatively affect actual yield.
Item Return Program cartridge
Toner Cartridge 24B6020 (XM7155, XM7163, XM7170, XM7263)
24B6826 (XM7270)
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen
on the front of the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of
the fuser.
Maintaining the printer 250