![background image](http://html.mh-extra.com/html/lenovo/thinkserver-ts200-6522/thinkserver-ts200-6522_hardware-maintenance-manual_203063184.webp)
Installing the rear adapter retention bracket
To install the rear adapter retention bracket, complete the following steps:
1.
Position the rear adapter retention bracket so that the hole in one of the hinge points is aligned with
the hinge pin on the chassis; then, place the hinge pin through the hole on the chassis.
2.
Rotate the rear adapter-retention bracket into place so that the hole in the opposite hinge point snaps
into place over the hinge pin on the chassis.
3.
Install the adapters.
4.
Go to “Completing the FRU replacement” on page 190.
Replacing the front adapter retention bracket
Use the following procedures to replace the front adapter retention bracket.
Removing the front adapter retention bracket
To remove the front adapter retention bracket, complete the following steps:
1.
Read the safety information that begins on page 1.
2.
Turn off the server and all attached devices; then, disconnect all power cords and external cables.
3.
Unlock and remove the side cover (see “Removing the side cover” on page 130).
4.
Open the front and rear adapter-retention brackets.
5.
Remove all adapters (if necessary) and place them on a static-protective surface.
Note:
You might find it helpful to note where each adapter is installed before you remove the
adapters.
6.
Grasp one side of the bracket at a hinge point and pull outward (while you rotate the bracket slightly
toward the rear of the server) until the hinge pin on the bracket is free of the hole; then, grasp the
bracket on the other side at the hinge point, pull outward until the bracket is free of the hinge pin,
and remove the rear adapter-retention bracket from the server.
Installing the front adapter retention bracket
To install the front adapter retention bracket, complete the following steps:
1.
Insert one of the hinge pins on the front adapter-retention bracket into the metal hinge point on the
fan cage assembly.
2.
Rotate the other hinge pin on the front adapter-retention bracket into position and push the hinge pin
into the other metal hinge point. The hinge pin will protrude through the hole in the metal hinge
point when the adapter-retention bracket is seated correctly.
176
ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Hardware Maintenance Manual
Содержание ThinkServer TS200 6522
