Lenovo System x3250 M5, Инструкция по установке и обслуживанию

Страница: 130 / 740

When LEDs are lit to indicate an error, they remain lit when the server is turned off, provided that the server is
still connected to power and the power supply is operating correctly.
Before you work inside the server to view light path diagnostics LEDs, read the safety information “Safety”
on page v and “Handling static-sensitive devices” on page 33.
If an error occurs, view the light path diagnostics LEDs and look at the operator information panel on
the front of the server.
• If the check log LED is lit, it indicates that an error or multiple errors have occurred. The sources of the
errors cannot be isolated or concluded by observing the light path diagnostics LEDs directly. A further
investigation into IMM2 event log or system-error log might be required.
The following illustration shows the operator information panel on the front of the server.
Figure 78. Operator information panel
The following table describes the LEDs on the operator information panel and suggested actions to correct
the detected problems.
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• If an action step is preceded by '(Trained technician only)', that step must be performed only by a Trained
technician.
• Go to the Lenovo support website at http://www.lenovo.com/support to check for technical information,
hints, tips, and new device drivers or to submit a request for information.
Table 11. The suggested actions to correct the detected problem for each LED light
LED Description Action
System locator (blue) This LED is used as a presence detection
button. You can use Systems Director or
IMM2 to light this LED remotely. Use this LED to visually locate the server
among other servers.
Check log (yellow)
An error has occurred and cannot be
isolated without performing certain
procedures.
1. Check the IMM2 event log and the
system-error log for information about
the error.
2. Save the log if necessary and clear the
log afterwards.
System-error (yellow) An error has occurred. 1. Check the light path diagnostics LEDs
and follow the instructions.
2. Check the IMM2 event log and the
system-error log for information about
the error.
3. Save the log if necessary and clear the
log afterwards.
116
Lenovo System x3250 M5Installation and Service Guide