2-44
［
］
2.4
HANDLING OF SWITCHES AND METERS
2.4.1
STARTER SWITCH
This switch is used to start or stop the engine.
• OFF (STOP):
At this position, you can insert or remove the starter
key. Before restarting or stopping the engine, turn the
starter key to the "OFF" position.
• ON:
Electricity flows in all circuits. During operation, the
starter key should be in this position.
• START:
When starting the engine, turn the key to the
"START" position. When the engine starts, release
your hand from the starter switch. The starter key will
return to the "ON" position by itself.
2.4.2
ENGINE THROTTLE
This dial adjusts the number of engine speed (output). This is a dial type rotary switch and a continuous adjustment
type. If you release the dial at a rotated position, it stops at that position, and maintains assigned engine speed.
LO
H
I
• LO (Low idle)
The number of engine speed is minimum at the end of
left rotation.
• H (High idle)
The number of engine speed is maximum at the end
of right rotation.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
