KI Tattoo Flex Screen, Руководство по сборке

Страница: 38 / 52

38
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Screens - Spine Screen Trim
Assembly Instructions
10-Wire Base Raceway Trim
Installation
Note: The power infeeds are to be
connected to the power source by
a qualified electrician who must
follow all state and local codes at the
building site and check the electrical
integrity of the finished system.
Note: All screens must be
mechanically connected together,
with all 10-wire rigid wireways and
screen-to-screen power connections
appropriately installed before adding
power infeed, or connecting infeed to
power source.
1. Install the base raceway trim by
aligning the trim openings with the
installed receptacle and engaging the
base trim lip with the bottom wireway
channel (Figure 43 & Detail CCC).
Spine
Screen
base
raceway
trim
Figure 43
base
trim lip
Detail CCC
base
raceway
trim
bottom
wireway
channel