KI Tattoo Flex Screen, Руководство по сборке

Страница: 48 / 52

48
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Screens - Accessories
Assembly Instructions
Slide Panel Installation
1. At the underside of each horizontal
frame are two horizontal frame
channels separated by the screen
core. Determine the location the slide
panel will mount to the frame, per the
space-planning layout (Figure 1).
2. Locate the horizontal frame access
holes at each end of the horizontal
frame channel. Insert the nylon glide
through one of the access holes and
slide panel towards the center of the
screen until the second glide can be
inserted through the same access
hole (Figures 1 & 2, Details A, B, C
& D).
Note: The slide panel has a writable
magnetic surface on one side and
a tack board on the other side.
Depending on which nylon glide you
insert first will determine which slide
panel face is facing out.
3. Two slide panel stoppers are
included with each slide panel kit.
The stoppers can be used to prevent
the slide panel from accidentally
falling out of the access holes. To
install the stoppers insert them
into the access hole and slide them
toward the center of the panel slightly
and tighten the screw to hold in place
(Detail D).
Flex Screen
or Spine
Screen
slide
panel
nylon
glide
horizontal
frame
Figure 1
screen
core
Detail A
slide
panel
horizontal
frame
access hole
horizontal
frame
channel
horizontal
frame
nylon
glide
slide
panel
horizontal
frame
channel
horizontal
frame
Detail B
Flex Screen
or Spine
Screen
slide
panel
nylon
glide
horizontal
frame
Figure 2
Detail C
slide
panel
horizontal
frame
access hole
horizontal
frame
nylon
glide
Detail D
slide
panel
horizontal
frame
channel
horizontal
frame
stopper