KI Tattoo Flex Screen, Руководство по сборке

Страница: 25 / 52

25
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Screens - Spine Screen 10-Wire Power
Assembly Instructions
7. On the rib side of the spacer cover,
space molding clips evenly apart and
press them onto the ribs of the cover
(Figure 25 & Detail JJ).
8. Position the spacer cover with
molding clips up against the spacer
cover channel with the 10-wire base
infeed routed through the opening at
the bottom of the spacer cover. Using
a firm hand, press on the spacer
cover at the molding clip locations to
snap molding clips into the spacer
cover channel (Figure 25 &
Detail JJ).
9. Reference “Leveling and Connecting
Spine Screens” instructions on
page 6 to connect remaining screens.
Spine
Screen
Spine
Screen
base infeed
spacer (in-line)
spacer
cover
spacer
cover
channel
molding
clip
10-wire base
power infeed
Figure 25
Detail JJ
spacer
cover
molding
clip
spacer cover
channel