KI Tattoo Flex Screen, Руководство по сборке

Страница: 39 / 52

39
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Screens - Spine Screen Trim
Assembly Instructions
End-of-Run Vertical Trim
Installation
1. Per the space-planning layout, locate
the end-of-run screen. Make sure
that screen is plumb and level.
2. Determine the length of the
end-of-run vertical trim by
measuring the distance from the top
of the Spine Screen vertical frame,
down to the floor at the end-of-run
trim location. Cut the trim to the
marked length.
3. On the rib side of the end-of-run
vertical trim, space molding clips
evenly apart and press them onto
the ribs of the end-of-run trim as
illustrated (Figure 44).
4. Position the end-of-run vertical trim
with molding clips up against the
vertical frame channel. Using a firm
hand, press on the vertical trim at
the molding clip locations to snap
molding clips into the vertical frame
channel (Figure 44).
5. Place the end-of-run corner cap into
the notch formed on the top corner
of the horizontal frame. Align the
mounting holes on the horizontal
frame with the mounting holes on
the corner cap and secure with two
#10-24 x
3
/
8
” Torx screws
(Figure 44).
Note: If Spine Screen is specified
with a topper kit and no Flex
Screen configurations are required,
proceed to page 47 for “Topper
Kit Installation” instructions. If
Flex Screen configurations will
be configured with Spine Screen
configurations and topper kits
are specified, proceed to page 42
for “Flex Screen Configurations”
instructions. If Spine Screen are not
specified with topper kits proceed to
“Flat Aluminum Top Cap Installation”
instructions on page 41.
Figure 44
Spine
Screen
end-of-run
vertical
trim
molding
clip
end-of-run
corner
cap
#10-24 x / ”
Torx screws
3
8
vertical
frame
channel
vertical
frame
horizontal
frame