KI Tattoo Flex Screen, Руководство по сборке

Страница: 42 / 52

42
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Screens - Flex Screen
Assembly Instructions
Flex Screen Configurations
Note: Flex Screens are free
standing, non-powered screens
designed to allow various screen
intersection options. Each Flex
Screen is either equipped with two
adjustable glide feet or one bridge
foot and one flat foot, to be used
in 90 degree configurations. See
instructions on pages 42-46 to
properly arrange the various Flex
Screen intersection configurations.
In-Line Flex Screens
Note: Reference Details A, B, C & D
for in-line Flex Screen configuration
options.
1. Carefully lift and arrange Flex
Screens in-line to each other per the
space-planning layout (Figure 1).
If screens are to install in-line in
preparation for a 3-way intersection
as illustrated on page 45 (Figure 4),
move screens in-line to one another
so that the flat foot of one screen
is adjacent to the flat foot of the
adjacent screen (Detail B).
Figure 1 - In-Line Flex Screens
Flex Screen
Flex Screen
bridge
foot
flat
foot
Detail A - In-Line Flex Screens
(bridge foot-to-at foot)
bridge
foot
flat
foot
Flex
Screen
Detail B - In-Line Flex Screens
(at foot-to-at foot)
flat
foot
flat
foot
Flex
Screen
Detail D - In-Line Flex Screens
(adjustable glide foot-to-
adjustable glide foot)
adjustable
glide foot
adjustable
glide foot
Flex
Screen
Detail C - In-Line Flex Screens
(bridge foot-to-bridge foot)
bridge
foot
bridge
foot
Flex
Screen