KI Tattoo Flex Screen, Руководство по сборке

Страница: 4 / 52

4
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Screens - Unloading
Assembly Instructions
Unloading
Warning: Shipping skids are designed
to be moved with a pallet jack or slid
along the floor using a fork lift. If no
dock is available to remove the skid
at grade from the bed of the trailer, the
screens must be unloaded by hand one
at a time. FAILURE TO COMPLY MAY
RESULT IN DAMAGED PRODUCTS
AND/OR INJURY.
1. It is highly recommended that the
screens be removed and staged with
protection between the screens. Lean
the screens vertically against a wall
at a slight angle. If screens must be
leaned on edge, no more than 12
screens of like size should be in one
leaning stack. Stack screens with the
padding against the wall or on the
floor to prevent damage.
2. As each screen or component is
unloaded, it should be checked
against the packing list and/or
space-plan layout (shop drawing)
to ensure completeness of order. All
items are identified by both a part
number sticker and a carton number
sticker.
3. Inspect each panel for shipping
damage as it is removed from the
truck. If damage exists, notify KI of
carton number, type of damage and
probable cause of damage within
24 hours of unloading.
4. Damage must be indicated on
bill of lading to file a freight
claim. Report all other on-site
damage as soon as possible to
ensure prompt replacements.
To transport panels on site, use
a well-padded drywall cart to
eliminate damage of edges and
finish.