Keba KeContact Series, Системное руководство

Страница: 80 / 156

Load management program
80 / 156
Wallbox configuration
Wallbox operating mode:
Describes whether the Wallbox allows Mode 3 charging controlled by
basic signalling, charging controlled by high-level communication or both.
The Operating mode Wallbox can only be changed if the Charge Point
operates in "Combined mode". Otherwise, the operating mode of the
Wallbox must be the same than the operating mode of the Charge Point.
Values:

Only basic signalling (Mode 3 only) :
Only Mode 3 charging controlled by basic signalling according to
IEC 61851-1 is possible.

Only ISO 15118 :
Only vehicles using high-level communication can be charged.

Combined mode :
Both Mode 3 charging and charging with high-level communication is
supported.
[default value: Combined mode]
Requires authorization?
Decides whether authorization is required at the Wallbox.
Enabling Authorization is only possible if Authorizing Charge Point is en-
abled.
Buttons
Save: Press the [Save] button to save the configuration data.
- Changes will not have an impact on currently active sessions.
Typical workflow: Changing the Operating mode of a Wallbox
►
Press the [Configuration] button in the toolbar. The Charge Point Configuration screen
appears.
►
Click at the button [Wallbox] in the menu bar at the left side of the web page. The wallbox con-
figuration screen appears.
►
Select the number of the wallbox for which the operating mode shall be changed.
►
Change the operating mode as required and click at the [Save] button. If a charging session is
currently active at the wallbox, this will not be affected by the new operating mode of the wallbox.
►
Return to the home screen by clicking on the [HOME] button .