Keba KeContact Series, Системное руководство

Страница: 145 / 156

Load management program
145 / 156
Address charge point:
The IP address which is assigned to ETH1.
Port charge point:
The port of the KeContact server to be used for OCPP communication
with that Host Interface. This port will be set in the WS-
Addressing “From”
field when sending an OCPP request. It is also relevant for firewall set-
tings.
Note : The port to be used is the port that can be used to access the Ke-
Contact server. If port forwarding is used this might be not the port of the
KeContact server, but of an intermediate node that will translate this port
into the real port of the KeContact server.
Changes to
“Address charge point” and “Port charge point” will apply to
all OCPP-based host interfaces, not only to the current interface.
Public Address CP: The URL of the KeContact server (without the port) to be used for OCPP
communication with that Host Interface. This URL will be set in the WS-
Addressing “From” field when sending an OCPP request.
Note: The URL to be used is the URL that can be used to access the
KeContact server. If NAT is used this might be not the URL of the KeCon-
tact server, but of an intermediate node that will translate this URL into
the real URL of the KeContact server.
Changes to “Public Address CP” and “Port Charge Point” will apply to all
OCPP-based host interfaces, not only to the current interface.
Authentication
Authentication central sys-
tem: Authentication method used at the host.
Display values:

None : No authorization is used.

Client Certificate : The host verifies client certificates (only possible if
UseTLS is checked)

Basic Authentication : The host uses basic http authentication.
User ID central system: User ID of the Charge Point at the host (only required when using basic
http authentication).
Password central system: Password of the Charge Point at the host (only required when using basic
http authentication).
Authentication charge point: Authentication method used at the Charge Point.
Display values:

None : No authorization is used.

Client Certificate : The Charge Point verifies client certificates (only
possible if UseTLS is checked).

Basic Authentication :
The Charge Point uses basic HTTP authentication.
User ID charge point: User ID of the host at the Charge Point (only required when using basic
http authentication).
Password charge point: Password of the host at the Charge Point (only required when using basic
http authentication).
Buttons
Save:
Press the [Save] button, to store the communication parameters of the
Central system interface.