Keba KeContact Series, Системное руководство

Страница: 35 / 156

Load management program
35 / 156
Typical workflow: Change password
►
Try to access a password-protected screen. The KeContact M10 presents the login screen.
►
Press the button [Change Password]
. The “Change Password” screen appears.
►
Enter the old and the new password and press the button [Change Password] .
In case a user forgets the password, an administrator can set a new password.
6.2.3 Standard accounts and passwords
Administrator-Account
Deleting the Administrator-Account is not possible. Change the password for this account immediately at the
first start-
up! Do not use very simple or predictable passwords (do not use e.g. “User name: admin / Pass-
word: password”).

User name: admin

Password: Serial number of the M10
Note: The serial number is shown at the login screen
(ID = “Keba_CS”serial number”)
Installation-Account
The installation account has access to all free accessible screens and the installation menu. Only accessible
with a direct physical connection to the Ethernet port [Eth0] of the KeContact M10.

User name: installer

Password: kecontactm10
Configuration-Account (Management-Account)
With the Configuration-
Account the system is operated. It has access to all menus except the „Installation
menu“. It is highly recommended to change at least the password for this account.

User name: manager

Password: danube
User-Accounts
Depending on the system it is possible to create user accounts with specific access permissions (details see
chapter “Management menu -> Manage Accounts”).
In your own interest, ensure to store all changed passwords (e.g., employee passwords) at a safe
place. If necessary, this allows the system owner to restore access to the accounts.