Keba KeContact Series, Системное руководство

Страница: 70 / 156

Load management program
70 / 156
Time zone:
Selection of the Time zone. Internally, the M10 uses UTC. If the user
selects a different time zone, any conversions happens at the user inter-
face.
Language:
Selection of the user interface language. If there is only one user inter-
face language available, the parameter "Language" is not shown.
[default value: English]
Buttons
Save:
Press the [Save] button to save the configuration data.
- Pressing the "Save" button affects all tabs of the screen.
- If the operating mode is changed to Mode 3 only or High-level only, the
operating mode of the Wallboxes will be changed accordingly.
Typical workflow: Changing the Operating mode of a Charge Point
►
Press the Configuration button in the toolbar. The Charge Point Configuration screen ap-
pears.
►
Change the Operating mode as required and click at the "Save" button.
If the new Operating mode is not "Combined mode", the Operating mode of the Wallboxes will be
modified to match to the new Operating mode. Currently active Charging Sessions are not affect-
ed.
►
If the new Operating mode is "Only ISO 15118" or "Combined mode", verify whether the NMK is
set correctly (see chapter “Management menu - Manage NMKs").
►
Return to the home screen by clicking on the [HOME] button .
Typical workflow: Configuring Maximum Power
►
Press the Configuration button in the toolbar. The Charge Point Configuration screen ap-
pears.
►
Enter the maximum current of the Charge Point (in A) and press the [Save] button. The maximum
current available at the Charge Point will be changed. A new power profile if one power profile
item "all days of week" and a power profile entry defining the maximum available current as limit
from 00:00 to 24:00 will be generated by the system. This power profile will be immediately valid.
Any local constraints that have been imposed on charging of electric vehicles (for example a
charging pause during the afternoon) contained in a power profile active before the change must
be entered again.
►
Return to the home screen by clicking on the [HOME] button .