Keba KeContact Series, Системное руководство

Страница: 110 / 156

Load management program
110 / 156
Token ID:
ID of the charging token (either PEV-ID or Token RFID or Session Se-
quence ID). Session Sequence ID will be used for manually generated
charging tokens.
Status: Status of the charging token.
All states except “Accepted” are considered
as “not able to authorize”.
Display values:

Accepted:
The Charging Token is accepted. It can be used to authorize a charg-
ing session.

Blocked:
The Charging Token has been blocked by an administrator or by the
system. The Blocking reason contains information about the Reason
of the blocking.

Expired
The Charging Token has been authorized, but the authorization has
expired.

Invalid:
The Charging Token has been recognized as invalid.

Pending:
The Charging Token is waiting for acceptance.

Overwritten:
The Charging Token has been (logically) deleted by an OCPP mes-
sage. It cannot be used for authorizing charging sessions. It is in the
data store of the KeContact server as long as there are any historical
charging sessions. Overwritten Charging Tokens will be purged dur-
ing housekeeping.
Status time:
Timestamp of the last status change of the Charging Token.
Expires:
The last day the Charging Token is valid.
Version:
Version number of a white list.
It is only populated if the Charging Token was imported from a file or from
an external system. This attribute will be updated each time a change for
the Charging Token will be imported.
Buttons
Import: Press the [Import] button to import a white list of charging tokens from a
file.
Change:
Press the [Change] button to change the selected charging token.
New: Press the [New] button to create a new charging token white list.
Unblock:
Press the [Unblock] button to set a blocked charging token status to “Ac-
cepted”.
Block:
Press the [Block] button to set the charging token status to “Blocked”
(status “Accepted” is required).
Accept:
Press the [Accept] button to set the charging token status to “Accepted”
(status “Pending” is required).