Installing Kaspersky Internet Security 6.0
35
We do not recommend deselecting the
Enable protection modules before
installing
when initially installing Kaspersky Internet Security. By enabling the
protection modules, you can correctly roll back installation if errors occur while
installing the program. If you are reinstalling the program, we recommend that
you deselect this checkbox.
If the application is installed remotely via
Windows Remote Desktop
, we
recommend checking
Enable protection modules before installing
.
Otherwise the installation procedure might not complete or complete correctly.
To continue installation, click the
Next
button.
Step 10. Completing the installation procedure
The
Complete Installation
window contains information on finishing the
Kaspersky Internet Security installation process.
If installation is completed successfully, a message on the screen will advise you
to restart your computer. After restarting your system, the Kaspersky Internet
Security Setup Wizard will automatically launch.
If there is no need for restarting your system to complete the installation, click
Next
to go on to the Setup Wizard.
3.2. Setup Wizard
The Kaspersky Internet Security 6.0 Setup Wizard starts after the program has
finished installation. It is designed to help you configure the initial program
settings to conform to the features and uses of your computer.
The Setup Wizard interface is designed like a standard Windows Wizard and
consists of a series of steps that you can move between using the
Back
and
Next
buttons, or complete using the
Finished
button
.
The
Cancel
button will
stop the Wizard at any point.
You can skip this initial settings stage when installing the program by closing the
Wizard window. In the future, you can run it again from the program interface if
you restore the default settings for Kaspersky Internet Security (see 17.12 on
page 262).
3.2.1. Using objects saved with Version 5.0
This wizard window appears when you install the application on top of Kaspersky
Anti-Virus 5.0. You will be asked to select what data used by version 5.0 you