KAESER TG 450, Руководство оператора, Страница: 60 / 116

To be checked See
chapter
Confirmed?
➤ Are all access doors closed and latched and removable panels in
place and secured?
–
Tab. 31 Installation conditions checklist
7.4 Starting the machine for the first time
Precondition No personnel are working on the machine.
All access doors are closed.
All removable panels in place and secured.
1. Switch on the power supply disconnecting device.
2. Press the «ON »key.
3. Open the shut-off valves to the air network.
4. Watch for any faults occurring in the first few hours of operation.
7.4.1 Registering the machine at the bus
Precondition The bus cabling has been completed and the RJ45 connectors are inserted at both ends of the net‐
work cable (see chapter 4.9).
The other network device (SIGMA AIR MANAGER 4.0, SBU, component on site) is running.
For connection to the user's Modbus TCP network: “SIGMA CONTROL SMART Technical Descrip‐
tion - Process Image”, document number: 7_9200_PCM_PA is provided.
The bus address of the communication module depends on its IP address.
During registration, only one machine with SIGMA CONTROL SMART (SCS) can be simulta‐
neously registered at SIGMA AIR MANAGER 4.0 or the Modbus TCP bus master. If you want
to register multiple machines with SCS, you have to do this in sequence. Any machine not yet
registered must remain deactivated.
1. Stick the adhesive label with the communications module's bus address (e.g. 11) onto the
module front. Adhesive labels for the last digit of the IP address are included with the SIGMA
AIR MANAGER 4.0.
Connection to a SIGMA NETWORK Connection to the user's Modbus TCP network
1. Register the machine with SCS at SIGMA
AIR MANAGER 4.0. The IP address is
transmitted to SCS. For details, see chapter
“Commissioning” in the SIGMA AIR
MANAGER 4.0 Operating Manual.
SCS communicates with the bus master using
the network
1. Register the machine as a Modbus TCP de‐
vice at the user's Modbus TCP bus master
and set the parameters. The IP address set
at the factory is 169.254.100.95. Use Mod‐
bus TCP to adjust the IP settings. For de‐
tails, see ID x10 to x22 in "SIGMA CON‐
TROL SMART Technical Description - Proc‐
ess Image”, document number:
7_9200_PCM_PA.
SCS communicates with the bus master using
the network
7 Initial Start-up
7.4 Starting the machine for the first time
50
Operator Manual Refrigerated Dryer
TG
No.: 901760 02 USE