KAESER TG 450, Руководство оператора, Страница: 15 / 116

The nameplate is attached directly at the heat exchanger within the machine.
Fig. 1 Heat exchanger nameplate
1
Heat exchanger
2
Nameplate
3
Insulation
4
Screw
1. Undo the screws
4
and carefully remove the insulation
3
.
2. Read the data on the nameplate
2
.
3. Re-attach the insulation and secure with screws
4
.
2.2 Options
The table contains a list of possible options.
➤ Enter options here as a reference:
Option Option code Available?
Floating contact: "Pressure dew point warning" C36 ✓
Floating contact: "Refrigerant compressor runs" C37 ✓
Communication module: Modbus TCP C44 ✓
Bolt-down machine mounts H1
Air-cooling K1 ✓
Water cooling:
Plate-type heat exchanger
K2
Electronic condensate drain, floating contact K6 ✓
Available: ✓
Not available: —
Tab. 4 Options
2.3 Weight
The values shown are maximum values. The actual weight of individual machines depends on
equipment fitted.
2 Technical Data
2.2 Options
No.: 901760 02 USE
Operator Manual Refrigerated Dryer
TG
5