KAESER TG 450 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 116

KAESER TG 450 Скачать руководство пользователя страница 23

3 Safety and Responsibility

3.1 Basic instructions

The machine is manufactured to the latest engineering standards and acknowledged safety regula‐

tions. Nevertheless, dangers can arise through its operation:
■ danger to life and limb of the operator or third parties,
■ impairments to the machine and other material assets.

Disregard of warning or safety instructions can cause serious injuries!

➤ Use this machine only if it is in a technically perfect condition and only for the purpose for

which it is intended; observe all safety measures and the instructions in the service manual.

➤ Immediately rectify (have rectified) any faults that could be detrimental to safety!

3.2 Specified use

The machine is intended solely to dry compressed air for industrial use. Any other use is consid‐

ered incorrect. The manufacturer is not liable for any damages that may result from incorrect use.

The user alone is liable for any risks incurred.
➤ Comply with the specifications shown in this service manual.
➤ Operate the machine only within its performance limits and under the permitted ambient condi‐

tions.

➤ Do not use compressed air for breathing purposes unless it is specifically treated.
➤ Do not use compressed air for any application that will bring it into direct contact with food

products unless it is specifically treated.

3.3 Improper use

Improper usage can cause damage to property and/or (severe) injuries.
➤ Only use the machine as intended.
➤ Never direct compressed air at persons or animals.
➤ Do not use untreated compressed air for breathing purposes.
➤ Do not allow the machine to take in toxic, acidic, flammable or explosive gases or vapors.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion

protection are in force.

3.4 User's responsibilities

3.4.1 Observe statutory and universally accepted regulations

This includes, for example, nationally implemented European directives and/or applicable national

legislation, safety and accident prevention regulations.
➤ Observe relevant statutory and accepted regulations during installation, operation, and mainte‐

nance of the machine.

3

Safety and Responsibility

3.1

Basic instructions

No.: 901760 02 USE

Operator Manual Refrigerated Dryer
TG

13

«
...
21
22
23
24
25
...
»

Содержание TG 450





















































































































Отзывы:

Нет отзывов