KAESER TG 450, Руководство оператора, Страница: 50 / 116

Fig. 23 Recommended machine placement and dimensions [in]
A
Exhaust air duct
Z
Air inlet aperture
1.
Ambient temperature too low!
Frozen condensate can damage the machine when starting.
➤ Switch the machine on only when the minimum switch-on temperature is reached.
2. Consult KAESER for measures where there is a risk of frost.
3. Ensure that all intake and exhaust apertures of the enclosure remain opened.
4. Ensure accessibility and adequate lighting so that all work on the machine can be carried out
without danger or hindrance.
5. Ensure that the displays can be read without glare and that the controller display is protected
from damage by direct sunlight (UV radiation).
6. If installed outdoors, protect the machine against frost, direct sunlight, dust, and rain.
5.2.2 Ensuring the machine room ventilation
Adequate ventilation of the machine room fulfils several functions:
■ It prevents a vacuum in the machine room.
■ It evacuates the exhaust heat of the machine and thus ensures the required operating condi‐
tions.
➤ Consult KAESER if you cannot ensure the conditions for adequate ventilation of the ma‐
chine room.
1. Ensure that the flow rate of fresh air is at least the same as the flow rate taken by the machine
and exhaust fan from the machine room.
2. Keep the inlet and exhaust apertures free of obstructions so that the cooling air can flow freely
through the room.
3. Do not install the machine in the exhaust air flow from other machines.
4. Ensure clean air in order to support the proper functioning of the machine.
5 Installation and Operating Conditions
5.2 Installation conditions
40
Operator Manual Refrigerated Dryer
TG
No.: 901760 02 USE