KAESER TG 450, Руководство оператора, Страница: 53 / 116

6.2 Reporting Transport Damage
1. Check the machine for visible and hidden transport damage.
2. Inform the carrier and the manufacturer in writing of any damage without delay.
6.3 Creating the air connection
Condensate in the compressed air network can damage the piping:
➤ Install only corrosion-resistant piping.
➤ Use fluoroelastomers as the material for the seals.
➤ Observe the electrochemical voltage sequence.
➤ Consult with KAESER concerning suitable materials for the compressed air network.
Precondition The compressed air network is vented completely to atmospheric pressure.
Fig. 24 Air connection
1
Compressed air line
2
Shut-off valve
3
Safety relief valve (user)
4
Loose flange (split)
1.
Serious injury or death can result from loosening or opening components under
pressure!
➤ Fully vent all pressurized components and enclosures.
2. Remove loose flange from the bottom of the machine and install on the air connections.
3. Fit shut-off valves in the compressed air inlet and outlet.
4.
The machine's compressed air system is internally not protected against any
exceeding of the maximum working pressure.
➤ The user must install a safety relief valve.
5. Screw the air connections to the compressed air line.
Further information The dimensional drawing in chapter 13.1 gives the size and location of the connection ports.
6 Installation
6.2 Reporting Transport Damage
No.: 901760 02 USE
Operator Manual Refrigerated Dryer
TG
43