manualshive.com logo in svg

Jungheinrich ETX 513, Руководство по эксплуатации

Поделиться
Скачать
Jungheinrich ETX 513 Скачать руководство пользователя страница 24

Optional equipment

– Mechanical rail guidance.
– Wire guidance for precise aisle guidance with no physical load on components.
– A range of modular telescopic forks.
– Truck prepared to receive work stations.
– “Workstation” comfort package with work lights and fan.
– Radio with CD player and MP3 interface.
– Synchronised swivel.
– Mechanical and electrical interfaces for material flow management systems.
– Jungheinrich ISM: Information system for truck management (

o

).

– Modular system of lift and travel cutouts plus speed reductions.
– Jungheinrich Warehouse Navigation:

– Connection  of  the  truck  to  a  warehouse  management  system  via  data  radio

terminal or scanner.

– Direct receipt of target position in narrow aisle by the truck computer.
– Automatic vertical positioning.
– Automatic horizontal positioning.
– Automatic stacking.
– Effective twin cycles.
– Avoidance of wrong journeys through area detection
– Maximum  flexibility  in  warehouse  through  adaptation  to  existing  warehouse

management systems and warehouse extension.

– Transponder-based truck controller system:

– permanent route measurement for precise detection of all warehouse areas.
– High  degree  of  flexibility  in  terms  of  switch  and  safety  functions  (end  of  aisle

safety device, lift/travel cutouts, speed reduction)

– Travel speed setting optimisation through ground topology.

– Integrated Jungheinrich personal protection system (PPS).
– Camera / monitor system for effective stacking and retrieval of pallets at height.
– Rack Height Select, see description below.

22

04.19 en-GB

Содержание ETX 513

























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды