manualshive.com logo in svg

Julabo Presto Series, Руководство по эксплуатации, Страница: 49 / 121

Поделиться
Скачать
Julabo Presto Series Скачать руководство пользователя страница 49

USER INTERFACE 

2.13.2018

 

 

49 

 
and set value.  

 

 

  

 

 

 

For setting range see display of unit 

 

 

 

 

   

 

 

 

  The setting ranges depend on the performance category of 

the temperature control system. 

9.2.3.  Upper and lower pressure warning limit  

 

 

 

 

The buttons will display the current 
settings. 
Choose button and set value.

 

 

 

 

 

 

Warning: 

Ticker in the status line 
   

 

 

 
 
 
If the pressure setpoint is too close 
to the warning limit, the warning will 
appear continuously and fill the list 
of errors. 

 

  

Touch the icon and the list of errors 
will be displayed. 

 

 
 

 

A 

>upper warning limit< 

and a 

>lower warning limit< 

can be set 

for monitoring the pressure in the system.  

If a warning limit is exceeded or undercut a signal will sound and a 

warning appears on the TFT-Display. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание Presto Series


























































































































Отзывы:

Нет отзывов