Julabo Presto Series Скачать руководство пользователя страница 29

Страница: 29 / 121

USER INTERFACE

2.13.2018

Legend:

A Internal bath
B External system
C Upper bandlimit
D Lower bandlimit

Lower bandlimit

and

Upper bandlimit

Bandlimits are active during external control.

Various settings are possible for the heat-up and cool-down

phases as required.
Setting range: 0 °C ... 200 K

Upper bandlimit

< and >

Lower bandlimit

< define the

maximum permissible temperature difference between the internal

bath and the external system during the heat-up or cool-down

phase, respectively.

During the heat-up phase, this difference value is always added to

the current external temperature. During the cool-down phase, the

difference value is subtracted.

Reasons for setting limits:



Protect the object being controlled with gentle temperature

control.



Protect glass reactors or other objects from thermal tension.



As long as >Bandlimit selftune< is engaged, the bandlimit will

be switched off during external control (see page 24 ).

Содержание Presto Series


























































































































Результаты поиска

Содержание Presto Series

Отзывы:

Julabo Presto Series, Руководство по эксплуатации, Страница: 29 / 121

Результаты поиска

Содержание Presto Series

Отзывы: