Julabo Presto Series Скачать руководство пользователя страница 17

Страница: 17 / 121

USER INTERFACE

2.13.2018

Block unit access immediately

Press the key

Block with time delay.

Press the key

Set time.

Press the key

"Deactivate" time or
"Edit" time.

Enter the desired time here, after which the unit will be blocked if

no additional entries are made.

Example: 5 minutes.

The current setting is shown on the button and will remain until

changed.

The unit will automatically switch to
the normal display.

Press

to enter password

If someone attempts to use a locked unit, a window will open to

notify the user that the unit is locked.

Example:

Access to the unit can be restored by entering the password of the

user group that locked the unit or the administrator password.

If an incorrect user group password is entered three times in a row,

the administrator password will be required to enable the unit.

Enable access to the unit.

Press Logout to confirm.

After pressing >Logout<, access to the unit is re-enabled.

Содержание Presto Series


























































































































Результаты поиска

Содержание Presto Series

Отзывы:

Julabo Presto Series, Руководство по эксплуатации, Страница: 17 / 121

Результаты поиска

Содержание Presto Series

Отзывы: