Julabo Presto Series Скачать руководство пользователя страница 47

Страница: 47 / 121

USER INTERFACE

2.13.2018

For setting range see display of unit



A High temperature cut-off (tank)

B Upper temperature limit

C Lower temperature limit

D Setpoint

The warning function will be activated only when the temperature

value is within the selected limit values for three seconds after

starting from the "OFF" condition.

9.1.3. Allowed temperature gradient per minute

Maximum allowed

temperature gradient

per minute during

heating

up /

cooling

down.

When the gradient limiter is activated, a setpoint step is executed

as a gradient with the values selected here.

This feature is valuable e.g. to safely implement temperature

changes with a sensitive glass reactor.

•

Activated limitation is shown as ticker on the regular

display.

Select

and set value

For setting range see display of unit



The buttons will display the current
settings

Choose button and edit value
or deactivate the function.

Attention:

The setting range for >

Gradient

<, in the chapter of programmer, is

limited by these values (page 36).

Содержание Presto Series


























































































































Результаты поиска

Содержание Presto Series

Отзывы:

Julabo Presto Series, Руководство по эксплуатации, Страница: 47 / 121

Результаты поиска

Содержание Presto Series

Отзывы: