Julabo Presto Series Скачать руководство пользователя страница 16

Страница: 16 / 121

Main menu view

2.13.2018

Administrator

Change Password:
Press the key

The user is asked to enter a new
password and reenter the
password for confirmation.

ATTENTION:

Record the new password in a secure place.

It will not be possible to access the unit without this password. The

factory password will be overwritten.

Forget your password?

This can be resolved only through the >Service menu< Page 45.

The authorized service person can delete the stored password and

reset it back to the factory setting.

3.2.2. User Groups - Managing Access to the Unit

Users can sign on with the password that has been assigned to

them.

After login, all settings approved for the relevant user group will be

accessible by everyone without reentering the password. Press

"Lock unit" to prevent misuse.

Press the key

in >

Main menu

The >

Unit account

< menu is

displayed.



Light gray buttons are blocked.

Press this button to login

Enter the password

Access to the unit is enabled for
the respective user group.
Permitted adjustments can now be
performed.

Содержание Presto Series


























































































































Результаты поиска

Содержание Presto Series

Отзывы:

Julabo Presto Series, Руководство по эксплуатации, Страница: 16 / 121

Результаты поиска

Содержание Presto Series

Отзывы: